Price: ₹990 - ₹850.00
(as of Apr 12, 2025 05:34:10 UTC – Details)
SARRU RSB (Remote Switch Board) is a digital small and easy to install controller with 1 remote ceiling fan regulator and 3 lights on/off switches. In a room you just install it and it can provide you 1 fan regulator and 3 light switches with manual and remote control. You also get very useful smooth start, timer and sleep mode for the fan control.
RSB (Remote Switch Board) 4 in 1 : It has four items in one small modular switch board that is 1 smart electronic remote ceiling fan regulator and 3 lights on/off remote switches.
FAN REGULATOR: Fan regulator has smooth start 10 steps (1,2,3,4,5,6,7,8 and 9) speed regulations with 1 to 9 hours timer off and sleep mode.
FAN TIMER: You can set timer off for 1 to 9 hours in 1 hour steps (1,2,3,4,5,6,7,8 & 9). The current timer value is shown on controller display. Once the timer is over the fan will automatically turned off.
FAN SLEEP MODE: When this mode is active the fan speed will be automatically reduce by 1 step in every 1 hour till it reaches to speed number 2.
FAN SMOOTH START: While turning on the fan the inbuilt software gradually increases the speed and avoids starting jerk specially turning on at higher speeds.
FAN AND LIGHT CONTROL: Fan and light both can be controlled either by remote as well as by controller button switches. REMOTE RANGE: More than 30 feet.
Do not install this controller along with old fan regulator and light switches. Please remove or bypass the old fan regulator and switches. If you have inverter then use this device only with pure sine wave inverter.
INBULT NON-VOLATILE MEMORY: Controller keeps fan and light setting stored in its memory even power goes away.
OPERATING VOLATGE: 230 VOLT, 50 Hz. CIRCUIT LOAD CAPACITY: Fan circuit = 100 watt maximum, Each light circuit = 100 watt maximum.
Product box contain 1 Controller, 1 Remote(without battery) and 1 Manual.. WARRANTY: 12 months.
